Connecting to a T-Stick 4GW/5GW

Option 1: Wireless Connection

Get your network details

1. Connect to the network you will be connecting the T-Stick to.
2. Note the SSID (network name) and SSID Password (network password).
3. Get your computers IP address while connected to this network. Below are linked some support articles for Windows, MacOS and Linux on how to find your computers IP address.
4. Find your IP Address Windows
5. Find your IP Address MacOS
6. Find your IP Address Linux

Connect to the T-Stick

1. Power on your T-Stick and wait until the boot sequence is complete. If your T-Stick does not have a Power switch press the button once and wait for the T-Stick to turn on.
2. Connect to the T-Stick_XXX wifi network where XXX is the ID of the T-Stick. ie: TStick_001. By default the password is mappings.
3. Open your browser and go to http://TStick_XXX.local/ or http://192.168.4.1, where XXX is the ID of the T-Stick module.
4. In the Network section write the network name and password optained in Step 2 in the SSID and SSID Password fields.
5. In the OSC send settings put in your computer's IP address optained in Step 3 in the Primary IP field.
6. Click the green Save button. You will be directed to a page saying that the information was saved successfully.
7. Click Config on the top of the page to return to the orginal menu.
8. Click the green Close and Reboot button at the bottom of the page.