Skip to content

Sensor Settings

Note

This page only applies to the T-Stick 4GW/5GW and their variants.

To access the T-Stick Settings page, access the T-Stick Setup page using the instructions shown in the connection guide.

You can access the settings of your T-Stick by connecting to the

Sensor Settings

  • fsr_offset: Set the minimum value of the FSR when no pressure is being applied. (Default: 2000)
  • touch_noise: Set the minimum value before a touch input is registered. Only applies to T-Sticks that use the Trill board or the EnchantiTouch board. (Default: 50)
  • jab_threshold: Set the sensitivity of the jab gesture. Larger values lower the sensitivity of the jab signal. (Default 5)
  • battery_size-mah: Set the battery size in mAh. Only applies to T-Stick 5GW using the MAX17055/MAX17262 fuel gauge. (Default 2000)